超声波萃取-高效液相色谱法测定总悬浮颗粒物中的多环芳烃

研究了一种用中流量采样器采样,超声波萃取,硅镁型吸附剂柱层析预分离.高效液谱测定总悬浮颗粒物的实验方法,在16分内可分高萘、蒽、芘、苯并(a)芘、苯并(ghi)苝等15种多环芳烃.已在大气环境的实际监测中得到应用.     

气浮溶气新技术应用研究

介绍对炼油厂净化水车间一级浮选2^#池的改造，并与未改造的1^#池进行工业应用对比试验。试验结果表明，改造后大大提高了气浮处理效果，平均除油率达85％，且除油效果稳定，出水合格率比对比池提高20．4％。     

水中酚类有机污染物HPLC分析及其应用

超声辐照技术降解水中有机污染物，其降解效率的主平价需要简单、快捷和精确的分析方法。为此研究了5种优先控制酚类污染物的HPLC分离及定量分析方法，方法的定量范围为0.4-100mg/L，检测限介于0.34-0.79ng/μL。4－氯酚的超声降解实验表明，随着反应溶液中4－氯酚初始浓度的降低，降解效率明显提高，因此该方法适用于超声降解过程中酚类污染物的跟踪测定。     

浅谈进口智能仪表在污水处理厂的使用和维护

对智能仪表的使用和维护进行了详细的介绍和讨论,指出使用智能仪表的优点及需要注意的具体事项并对仪表可能出现的问题进行了研究和探讨。     

超声降解水中污染物技术浅述

介绍了超声降解水中污染物的机理、影响因素和几种典型的超声联用技术。并指出超声技术在今后水处理应用领域的研究方向。     

First and early second-trimester diagnosis of fetal urinary tract anomalies using transvaginal sonography

Urinary tract anomalies are common. Prenatal diagnosis is important and enables either special obstetric management or termination of pregnancy and probably in the future, intrauterine intervention. Transvaginal sonography (TVS) allows visualization of the normal and anomalous fetal urinary tract at an early stage. One thousand nine hundred and forty women were examined via TVS at an early stage of pregnancy between 10 and 16 weeks from the last menstrual period (LMP) and 35 anomalies (1·8 per cent) were clearly identified: 29 cases of low urinary tract obstruction, 2 cases of multicystic dysplastic kidney, 2 cases of polycystic kidney (infantile type), 1 case of double collecting system, and 1 case of horseshoe kidney. Potter syndrome could be ruled out in three patients who had delivered fetuses suffering from this anomaly in previous pregnancies. The concise and early identification of anomalies makes TVS an important aid in the hands of the obstetrician, ultrasonographer, and neonatologist.     

超声-臭氧氧化处理硝基苯废水实验研究

在实验装置上对超声-臭氧氧化处理硝基苯废水进行了实验研究，主要考察了废水初始pH值、反应时间，臭氧通入量、超声功率等因素对硝基苯去除率的影响，实验结果表明，超声辐射可以在臭氧氧化过程中起加速反应的作用，而且随着超声功率的增大，加速反应的能力增强；废水初始pH值为11时硝基苯去除效果最佳；随着臭氧通入量的增大，反应时间的延长，硝基苯去除率不断增大；超声-臭氧处理硝基苯废水过程中硝基苯的降解规律为表现一级反应。     

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.     

Vibrational energy loss analysis in battery tab ultrasonic welding

In ultrasonic metal welding processes, high-frequency ultrasonic energy is used to generate friction and heat at the interface between weld parts to produce solid-state bonds. It has been observed that sufficient energy is required to produce proper bonding, while excessive energy can cause such quality issues as weld fracture and perforation. Therefore, it is important to have a product/process design in ultrasonic welding to ensure efficient energy conversion from ultrasonics to welding energy, minimizing energy loss in the process. In this work, vibrational energy loss associated with the longitudinal and flexural vibrations of the Cu coupon during ultrasonic welding is studied by applying one-dimensional continuous vibration models. To facilitate our modeling, experimental results from the free response of Cu coupon were obtained to determine the damping characteristics of the Cu coupon in the welding process. Our analysis shows that substantial energy loss can occur during welding due to the flexural vibration of the Cu coupon, especially when the overhang (the upper part of the Cu coupon extended from the anvil) of the Cu coupon resonates at or close to the welding frequency (about 20 kHz), degrading the weld quality of battery tabs. This study contributes to understanding the fundamental dynamics of the Cu coupon during ultrasonic welding and its impact on weld quality.     

超声波去除农用污泥中重金属的试验研究

污水处理厂污泥中的重金属浓度高是污泥农用的主要障碍。为了降低农用污泥中的重金属含量,以Cu、Zn、Ni、Pb为对象,研究了超声波对其的影响。结果表明:超声对污泥中重金属有一定的溶出作用。当超声时间为30min时,溶解状态Cu、Zn、Ni、Pb的析出率分别为42.1%、37.5%、12.7%、14.7%;总的析出率分别为52.7%、44.7%、23.6%、71%。其中析出的Pb大部分以胶体状态存在,而溶解状态只占很少一部分。其他几种金属则以溶解状态为主。